Water treatment filter bags
The main materials of water treatment filter bags are
Nonwoven, needle-punched felt, felt, PP, polypropylene, polypropylene, PE, polyester, polyester nylon monofilament, nylon, vinyl, etc.
Water treatment filter bag ring mouth materials are:
Stainless steel ring, galvanized ring, PP plastic ring, PE plastic ring, other ring mouth, no ring mouth, ring mouth tied rope and other specifications can be customized.
Water treatment filter bag bag body production process:
Full welding, full line stitching, bottom seam hot fusion ring mouth line stitching, bottom seam line stitching ring mouth hot fusion, steel ring full line stitching, plastic ring full line stitching, ring mouth line stitching bag body welding, bag body line stitching ring mouth welding and other processes, can also be customized according to customer requirements for non-standard bags.
Characteristics of water treatment filter bags:
With loose fiber organization, super air permeability and other characteristics, direct retention and adsorption of small particles, both effective in capturing fine solids and colloidal particles, and not easy to block. High strength fiber filaments are interlaced to avoid breakage due to increased fluid pressure in the filtration process. The surface of the felt adopts high-temperature heat treatment and burnishing treatment, which will not cause contamination of filtrate due to fiber detachment, but also avoid excessive blockage of filter holes caused by traditional roller processing, which affects the flow and life. With high efficiency, low cost, large dirt holding capacity, etc., can be cleaned, but after washing can not completely reach the new product into degree, can choose the number of reuse according to the actual situation, but generally do not recommend cleaning.
Water treatment filter bags are suitable for:
1. electronic industry: water filtration, process water pre-treatment, tape coating, air pre-filtration
2. Food and beverage industry: fruit juice, mineral water, milk, beer, brewing, vinegar making, edible oil.
3. Chemical industry: emulsion, resin dye, lubricant, oil agent, varnish, petroleum, phosphate coating agent, chemicals, hot solvent, etc.
4. Biopharmaceutical industry: filtration of Chinese medicine, pharmaceutical water, rinse water, biological and fermentation high viscous liquid, cosmetics, etc.
5. Environmental protection: industrial and domestic water, textile and paper wastewater, metal cutting fluid, cleaning agent filtration
6. Automotive industry: painting, coating and paint filtration
Specifications of water treatment filter bags:
过滤袋规格
|
直径 长度
|
流量
(立方米/小时)
|
过滤面积
(平方米)
|
容积(L)
|
1#袋
|
180X410
|
20
|
0.25
|
8
|
2#袋
|
180X820
|
40
|
0.5
|
17
|
3#袋
|
100X230
|
10
|
0.15
|
1.3
|
4#袋
|
100X420
|
18
|
0.2
|
2.5
|
5#袋
|
152X520
|
12
|
0.18
|
8
|